TOSHIBA

T1000 MODEM

Card Type                Modem (asynchronous)
Chip Set                 Unidentified
Maximum Data Rate        2400bps
Data Bus                 Internal/Toshiba bus
Data Modulation Protocol Bell 103/212A

                         ITU-T V.21, V.22, V.22bis

[Image]

                                CONNECTIONS

       Function           Label             Function              Label

  Line in                     CN1       Proprietary connection     CN3
                                        to computer

  Line out                    CN2

                                   Power

                 Setting                                 SW1

     Auto-start with telecommunication               Position 1
                 software

                   Off                               Position 2

                    On                               Position 3

                           SUPPORTED COMMAND SET

                             Basic AT Commands

  AT, ‘+++’, ‘Comma’, ‘Semicolon, A/

  A, B, C, E, F, H, I, L, M, O, P, Q, S, T, V, X, Y, Z

  &C, &D, &F, &G, &P, &T, &W, &Y, &Z

                                S Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18,
  S21, S22, S25

  Note: See MHI Help file for full command documentation.

                         Proprietary AT Command Set

   See TOSHIBA, T1100PLUS MODEM/T1200 MODEM/T3100 MODEM/T5100 MODEM/T5200
                 MODEM document for a full command summary.